VIEW 730

A Digital Measuring Equipment & Powerful Power Meter

A powerful instrument for measuring home appliances, OA products (office automation), and equipment with large power and process control automation.

Widely used in the areas such as power industry, office or home appliances testing and evaluation, battery drive test and motor efficiency test.

730
View730_2
View730_3
View730_4
  1. Status display I
  2. Measurement display
  3. Displayed function settings
  4. Range setting
  5. Navigation keys
  6. Function settings I
  7. Wiring settings
  8. Function settings II
  9. Integration setup keys
  10. Status display I
  11. Power switch
  1. Voltage input terminal
  2. D / A connector
  3. USB connector
  4. GP-IB / RS-232 connector
  5. Power switch and power cord connector
  6. Ethernet connector
  7. EXT current sensor input terminal
  8. Current input terminal
Technical Specification
permitted supply range voltage
from 90 to 264 VAC
rated power supply frequency
from 100 to 240 VAC
Warm-up Time
approximately 30 minutes
operation environment
temperature: 5°C ~ 40°C
humidity: from 20% to 80%RH(no condensation)
operating altitude
2000m or less
applicable environment
indoors
Home appliances and Office equipment

Recently, there are more concerns about energy efficiency, such as reducing the power consumption for the civil electrical appliances (such as air conditioner, washing machine, induction cooker, water heater).

The digital power meter can be used to test the power produced by home appliances. One piece of the digital power meter of this series can effectively measure the voltage, current, power, frequency, power factor and THD (Harmonic distortion).

Industrial equipment and Transportation

Automotive – Battery or Driven Device Evaluation

This digital power meter can directly measure the high current up to 20A. This provides an economical and accurate method for testing DC driven devices in vehicles without any extra sensors.

Testing in Production Line

This instrument is so compact in structure to be easily mounted on the shelf for testing during production. Testing platform can be economically set up at a favorable price. The parameters such as voltage, current, frequency, power factor, and harmonics can be measured by this digital power meter, so as to improve testing efficiency.

Evaluation Testing of Special Waveform Driven Devices and Distorted Waveforms (including DC Component)

The digital power meter of this series has a broad frequency capability of DC (from 0.5Hz to 100 kHz). It can measure the RMS value of distorted waveforms like square waveforms or special waveform driven devices. The average active power measurement function gives accurate power consumption data for fluctuating power devices such as burst waveform operated devices. Therefore the users can perform accurate distorted waveform measurements without any need to setting special modes.

INNO PA Viewer Software
The INNO PA Viewer is an software installed in PC available to remotely control the digital power meter connected via a communication interface (network connector or USB connector), and display the results analyzed by the digital power meter in the form of numeric, waveform, trend, vector, and bar graph.

Related Products