Ribbon Stripper
TS Plus
TS-Plus is a newly developed simple type ribbon stripper with built-in heater and designed to strip up to 12 ribbon fibers. This exceptional product is extremely easy to use in the FTTx industry and in any difficult-to-operate environment.
Up to 12, Thermal stripper dedicated only for Ribbon fibers. Stripper dedicated for Ribbon fibers Portable (easy to carry) stripper World's fastest heating time: 4 seconds
Size and Weight
Height: 1.33 inches (34 mm)
Width: 5.47 inches (139 mm)
Depth: 1.33 inches (34 mm)
Weight: 0.66 pounds with battery (302grams)
0.57 pounds without battery (260grams)
How to use
  • 1. Turn on the TS-Plus and choose a proper mode and temperature.

  • 2. Place fiber holder, close the cover and stick the holder part to the main body.

  • 3. Press cover and wait until temperature light flickers.

  • 4. Pull the holder section out of the main body and open the holder part to check the stripped fiber.

Fiber Material Silica glass
Coating Material UV cured resin
Coating Thickness "Single fiber: 0.25~0.4mm 2 to 12 Ribbon fiber: 0.3~0.4mm”
Cladding Diameter 125μm
Coating Removal Length max 30mm
Heating Mode Normal mode / Power save mode
Temperature Settings Normal mode: approx. 80℃, 95℃, 110℃, 130℃
Power save mode: approx. 70℃, 80℃, 95℃, 110℃
Fiber Holder Type FH-2, FH-4, FH-6, FH-8, FH-10, FH-12, FH-250, FH-900,
FH-U (Universal Holder both for 250μm and 900μm)
Power Supply Method 1) AC drive: AC100~240V, 50/60Hz
2) DIN port: DC 12V power supplied from fusion splicer
Operating Condition Temperature: 0℃~40℃ / Humidity: 0%~95%
Applicable Fiber Type Single fiber: 250μm, 900μm, 3.0mm fiber cable and flat cable
Ribbon fiber: 2 to 12 ribbon fiber cable
Heating Time Approx. 4~5sec at normal mode
Approx. 5~6sec at save mode
Battery Capacity Approx. 500 stripping with 12 ribbon fiber with a full charged battery